Dell PowerEdge M600 - Manual (Page 113)

Installing Blade Components
113
General Memory Module Installation Guidelines - PowerEdge M600
To ensure optimal performance of your system, observe the following
guidelines when configuring your system memory.
• Memory modules must be installed in pairs of identically-sized DIMMs.
The total number of memory modules must equal two, four, or eight. Six
modules are not supported.
• All memory modules in the blade must be identical in speed and
technology. The memory modules in each pair must be the same size.
For best system performance, all memory modules should be identical
memory size, speed, and technology.
• Memory sparing and memory mirroring require eight memory modules of
identical size, speed, and technology.
Memory sparing and memory mirroring cannot be implemented at the
same time.
Table 3-5 shows examples of supported memory configurations.
NOTICE:
Memory module blanks must be installed in unoccupied memory sockets
to maintain proper cooling airflow.
Table 3-5. Examples of Memory Configurations - PowerEdge M600
Total
Memory DIMM
1 2 3 4 5 6 7 8
1 GB 512 MB 512 MB blank blank blank blank blank blank
2 GB 512 MB 512 MB 512 MB 512 MB blank blank blank blank
2 GB 1 GB 1 GB blank blank blank blank blank blank
4 GB 512 MB 512 MB 512 MB 512 MB 512 MB 512 MB 512 MB 512 MB
4 GB 1 GB 1 GB 1 GB 1 GB blank blank blank blank
8 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB
8 GB 2 GB 2 GB 2 GB 2 GB blank blank blank blank
16 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB
16GB 4 GB 4 GB 4 GB 4 GB blank blank blank blank
32 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB