Oweredge m600) or figure 3-19 (p – Dell PowerEdge M600 User Manual
Page 133
Advertising
Installing Blade Components
133
Figure 3-19.
Installing and Removing a Heat Sink (PowerEdge M605)
4 Remove the heat sink.
Set the heat sink upside down on the work surface to avoid contaminating
the thermal grease.
5 Use a clean lint-free cloth to remove any thermal grease from the surface of
the processor shield.
6 Pull the socket-release lever straight up until the processor is released
from the socket. See Figure 3-20 (PowerEdge M600) or Figure 3-21
(PowerEdge M905, M805, or M605).
1
heat sink
2
screws (4)
3
socket CPU2
4
socket CPU1
2
1
4
3
Advertising