Dell PowerEdge M600 - Manual (Page 17)

About Your System
17
• Status information screens for the modules installed in the back of the
enclosure, including the IO modules, fans, CMC, iKVM, and power
supplies.
• A network summary screen listing the IP addresses of all components in
the system.
• Real time power consumption statistics, including high and low values,
and average power consumption.
• Ambient temperature values.
• AC power information
• Critical failure alerts and warnings.
Using the LCD Module Menus
Table 1-2 lists the keys that you use to view or change information on the
LCD module screens.
Configuration Wizard
When you first start up your system, you will be directed to configure the
CMC network settings. The configuration wizard also automatically
configures each blade’s iDRAC internal network interface. The iDRAC IP
addresses are incremented from the CMC IP address.
NOTE:
After you run the configuration wizard, this option will no longer be
available on the LCD menus.
1 Choose a language from the options presented in the dialog box.
2 Start the configuration wizard.
Table 1-2. LCD Module Screen Navigation Keys
Keys Action
Left and right arrows Move between screens.
Up arrow or down arrow Move to the previous or next option on a screen.
Center button Select and save an item and move to the next
screen.