Dell PowerEdge M600 - Manual (Page 30)

30
About Your System
iKVM Module
The optional Avocent iKVM analogue switch module includes the following
features:
• Local iKVM access can be remotely disabled on a per blade basis, using the
blade’s iDRAC interface (access is enabled by default).
NOTE:
By default (enabled), a console session to a given blade will be
available to both the iDRAC interface and iKVM (users connected to a blade's
console via iDRAC and the iKVM will see the same video and be able to type
commands). If this sharing is not desired, this can be disabled via the iDRAC
console interface.
• The following connectors:
– One VGA connector. The iKVM supports a video display resolution
range from 640x480 at 60Hz up to 1280x1024x65,000 colors
(noninterlaced) at 75Hz.
– Two USB ports for keyboard and mouse.
NOTE:
The iKVM USB ports do not support storage devices.
Table 1-6. Fan Indicators
Indicator Indicator
State Description
Power indicator Green The power supply is connected to an 208VAC
AC power source.
NOTE:
This indicator will not illuminate if the
power supply is connected to a 110 VAC power
source.
Off AC power not connected.
Fault indicator Amber The fan is in a fault condition.
Off Fan not faulty.