Dell PowerEdge M600 User Manual
Page 208
208
System Board Information
6
D1 – D4
memory modules D1 – D4
7
CPU4
Processor 4 socket
8
C1 – C4
memory modules C1 – C4
9
PSWD_EN,
NVRAM_CLR
system configuration jumpers
NOTE:
Access requires removal of system board. See
"Removing the System Board" on page 150.
10
connector for the 3.0-V coin battery
NOTE:
Access requires removal of system board. See
"Removing the System Board" on page 150.
11 J_STORAGE
Storage controller card connector
12
Hard-drive backplane connector
13
Hardware key socket for integrated NIC TOE/iSCSI
feature
14 CPU3
Processor 3 socket
15 CPU1
Processor 1 socket
16 A1 – A8
memory modules A1 – A8
17
video controller card connector
18
MEZZ1_FAB_C
Mezzanine card connector 1 Fabric C
19
MEZZ2_FAB_B
Mezzanine card connector 2 Fabric B
20
MEZZ3_FAB_C
Mezzanine card connector 3 Fabric C
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
Table 7-5.
PowerEdge M905 System Board Connectors (continued)
Connector
Description