Dell PowerEdge M600 - Manual (Page 54)

54
About Your System
PowerConnect M6220 Ethernet Switch Module
The PowerConnect M6220 Ethernet switch module includes four external
10/100/1000 Mbps Ethernet connectors and one USB type A form factor serial
connector. See Figure 1-19.
Two option bays support the following three module options:
• A resilient stacking module with 2 x 24 Gb stacking ports
• A 10 Gb Ethernet module with two 10 Gb optical XFP connectors
• A 10 Gb Ethernet module with two copper CX4 uplinks.
Installing two option modules provides additional stacking and redundancy
support. Sixteen internal Gb Ethernet connectors link to the blades in the
enclosure.
For additional information about the PowerConnect M6220 Ethernet switch
module, see the documentation that shipped with the module. For general
information on installing this module, see "I/O Modules" on page 166.
Table 1-14. Cisco SFS M7000e Infiniband Switch Indicators
Indicator Type Pattern Description
Infiniband
port status
indicator Off Link error or Subnet Manager not operating
Green flickering I/O activity on port
Green on Link established
Module status
indicator Off Switch is not ready
Blue on Switch operating normally
Amber on or
blinking Fault condition in module
Module power
indicator Off Power to the module is off
Green Module has power