Installing a fan module, Cmc module, Removing a cmc module – Dell PowerEdge M600 User Manual
Page 162
Advertising
162
Installing Enclosure Components
Figure 4-3.
Removing and Installing a Fan Module
Installing a Fan Module
1 Inspect the fan for debris before installing the fan in the enclosure.
2 Slide the fan module into the enclosure until it is fully seated and the
release button engages. See Figure 4-3.
CMC Module
Removing a CMC Module
1 Disconnect the cables attached to the CMC module.
2 Press in the release latch on the handle and rotate the handle away from
the module front panel.
1
fan module
2
release button
1
2
Advertising