Salter Brecknell 6700U Series (USB) - Manual (Page 50)

50 67XXU USB/Serial Scale Service Manual
OTHER NLD.RG 1-255 10 No hold range Load must return to zero in
divisions to perform a print when in
AUTO.
1-255=the range of weight is 1-
255d. When current weight is less
than this value, the scale can be
regarded as empty, or the load on
scale is removed.
It must be bigger than
(CONFG.MOTON).
CMD.SR NONE COM1.2 Command source
Turns COM1 / COM2 on/off (1) NONE=no any command will be
executed
COM.1 (2) COM.1= command from COM1
will be executed
COM.2 (3) COM.2= command from COM2
will be executed
COM1.2 (4) COM.1.2= command from
COM1 or COM2 will be executed
Legacy 0-2 1 Status bit setting 0=no change to output string. Can
send 3 or 4 status bits
1=all data sent ot has 2 status bits =
bit 6. Character 2 must be set to 0
2=all data sent out has 3 status bits
and 7 weight characters.
A.OFF.T 0-255 0 Auto off time 0=not auto power off
1-255=auto power off after 1-255
minutes. In this period, no operation
or no weight change
LCD.BL 0-255 30 LCD backlight set (1) 0=always off
(2) 1=always on
(3) 2=press down ZERO+UNIT
together more than 3s to turn on or
turn off
(4) 3-255=auto on when key
operation or weight changing. Auto
off after 3-255s elapsed.
TA.key yes yes Tare key enable Yes= tare key is enabled
no No= tare key is disabled
phd.rg 0-8 0 Photo eye TARE sensitivity (1) 0= remote TARE key disabled
(2) 1-8 = sensitivity level
1= close distance - 8= long distance
SCL.ID 000000-
999999
123456 Scale ID number: 000000-
999999
USER
SubMenu1 SubMenu2 Option Default Parameter Description Comment