Salter Brecknell 6700U Series (USB) - Manual (Page 51)

67XXU USB/Serial Scale Service Manual 51
5.3.3 CAL Menu
Figure 5.3 CAL Menu Chart
The figure above is an illustration of the available menus with the CAL menu and the
choices within those menus. Refer to
Table 5.4 for explanations of the menu choices.
Table 5.4 CAL Menu Choices and Explanations
CAL.ON
CA.OFF
ZERO LINE GEO INPUT
CODE GRAVT
00-70
9.76183-
9.99999
CAL.PO CAL.P1 END.Y CAL.P2 END.Y CAL.P3
Yes No Yes No
CAL
Submenu1 Submenu2 Option Parameter Description Comment
CAL.ON
CA.OFF Seal switch position The display will show whether the
seal switch is in the ON or Off
position. This parameter can’t be
changed within the software.
ZERO Zero point calibration Only do zero point calibration, then
go to CAL.END to end (only need
where a zero shift has occurred).