Salter Brecknell 6700U Series (USB) - Manual (Page 53)

67XXU USB/Serial Scale Service Manual 53
5.3.4 MISC Menu
Figure 5.4 MISC Menu Chart
The figure above is an illustration of the available menus with the MISC menu. There
are no programming choices within this menu. Refer to
Table 5.5 for explanations of
the menu choices.
Table 5.5 MISC Menu Choices and Explanations
5.3.5 TEST Menu
Figure 5.5 TEST Menu Chart
The figure above is an illustration of the available menus with the TEST menu. There
are no programming choices within this menu. Refer to
Table 5.6 for explanations of
the menu choices.
Table 5.6 TEST Menu Choices and Explanations
CODE VOL VER
MISC
Submenu1 Remark
CODE Display A/D counts = approximately 100,000 counts per mV
VOL Display voltage; calibrate voltage; set full charged voltage and low battery voltage
VER Display firmware version
DSP.TS CM1.RD CM1.TD CM2.RD CM2.TD KEY.TS
TEST
Submenu1 Remark
dsp.ts Test LCD
cm1.rd Test COM1 receiving
cm1.td Test COM1 transmitting
cm2.rd Test COM2 receiving
cm2.td Test COM2 transmitting
KEY.ts Test keys and buzzer