Salter Brecknell 6115 - Manual (Page 28)

Scale is not transmitting data to the host device
1. Check cable connection at both the rear of the
scale and the host device.
2. Check communication setting and baud rate
on both scale and software.
3. Perform I/O loopback test.
4. Replace the main board.
The ZERO key and the TEST key do not function
1. Open display enclosure and verify that the
keypad cable is still installed correctly.
2. Replace the display panel.
3. Replace the display PCB.
4. Replace the display cable.
5. Replace the main PCB.
DESCRIPTION PART NUMBER
Keyboard Panel
1163-14671
Display PCB LED 7405-15465
Display PCB Photo 7405-16860
Display Cable 20"* 1140-16912
Display Cable 2' 1140-14802
Display Cable 7' 1140-14217
Display Cable 14' 1140-14218
Load Cell (7.5 kg) 7154-16321-07
Load Cell (15 kg) 7154-16321-15
Main PCB Board 7405-16315
Power Supply 6103 1148-15535
Power Supply 6112/6115 1148-15536
RS-232 Cable 1140-13842
Magnetic Strip Kit 7200-17084
Feet 6103 7075-10256
Feet 6112/6115 7075-15144
Spare Parts and Accessories
25
*(used with rear flat bracket design)