Salter Brecknell 6115 - Manual (Page 6)

Initial zero value established on power up if within
25% of full scale and the calibrated zero value.
Center-zero indicated up to 1/2 division. Full
capacity zero range capable. Auto-zero tracking
(AZT) is standard to 1 division.
Under capacity indication will be given with dashes
appearing on the bottom line of the display when-
ever the display is more than 9 divisions below the
initial zero value.
Over capacity indication will be given with dashes
appearing in the upper line of the display when-
ever the weighed item exceeds 9 divisions over
the rated capacity of the unit. The scale will use
the initial zero value for reference for over capacity
determination.
The scale has 65,000 internal counts maximum.
The usable range is approximately 50,000 counts.
The time from when weight is applied to the scale
to the time for a stable weight display with an
applied weight of:
0 - 1000d 1.5 seconds, maximum mean average
1000d+
2.0 seconds maximum mean average
Factory default settings: 9600 baud, 7 data bits,
even parity, 1 stop bit.
Standard 9-pin pass through RS-232 interface
Not a null modem. Protocol is NCI standard only.
Zero Window
Under Capacity
Limits
Over Capacity Limits
Internal Counts
Dynamic Response
Communications
3