Chapter 3: wiring, Chapter 4: programming – Detex DTX-4300 User Manual

Page 4

Advertising
background image

Chapter 3: Wiring

3.1 Wiring the prox.pad plus Unit...........................3-1

3.1.1 Wiring the Door Contact Input...................3-1
3.1.2 Wiring the AUX Relay for Use as Alarm
Shunt .........................................................................3-3

3.1.2.A Wiring the Alarm Shunt Relay...........3-3

3.1.3 Wiring the AUX Relay for Use as Forced
Door...........................................................................3-5

3.1.2.A Wiring the Forced Door Relay ...........3-5

3.1.4 Wiring the AUX Relay for Use as
Propped Door..........................................................3-7

3.1.3.A Wiring the Propped Door Relay ........3-7

3.1.5 Wiring the REX Switch (Request to Exit) ..3-9
3.1.6 Wiring the Main Relay..................................3-11

3.2 prox.pad plus Communications ........................3-13
3.3 Networking Multiple prox.pad plus Units
Together .......................................................................3-14
3.4 Testing the prox.pad plus ...................................3-16

3.4.1 Testing the Controller/Keypad....................3-16

Chapter 4: Programming

4.1 Programming Overview .....................................4-1

4.1.1 Programming from the Keypad..................4-2

4.1.1.A Master Code (User Location #1) .......4-2
4.1.1.B Supervisor Code (User Location #2).4-3
4.1.1.C Master Code and Supervisor Code
Special Features..................................................4-3
4.1.1.D prox.pad plus Default Settings ..........4-4
4.1.1.E Resetting the Master Code and
System Defaults Only .......................................4-6
4.1.1.F Erasing Entire Memory/Resetting
System Defaults..................................................4-7

Table of Contents

iv

prox.pad plus Install/Program. Manual, PPP, D4b

Part No. 6105679, Rev. 1.1

Advertising