Detex DTX-4300 - Manual (Page 7)

List of Illustrations
Figure 1-1 RS-485 Configuration.........................1-5
Figure 1-2 LAN/WAN Configuration.................1-5
Figure 2-1 prox.pad plus Wiring Harness.........2-3
Figure 2-2 Identifying Pin Connectors ..............2-4
Figure 2-3 Performing a Wall Mounted
Installation ...........................................2-8
Figure 2-4 Performing a Glass Mounted
Installation ...........................................2-10
Figure 2-5 Performing a Secure Installation .....2-12
Figure 2-6 Removing/Inserting Printed Circuit
Board ....................................................2-15
Figure 2-7 Program Button Location on Main
Circuit Board .......................................2-17
Figure 3-1 Wiring the Door Contact Input .......3-2
Figure 3-2 Wiring the Aux Relay for Alarm
Shunt Operation.................................3-4
Figure 3-3 Wiring the Aux Relay for Forced
Door Alarm..........................................3-6
Figure 3-4 Wiring the Aux Relay for Propped
Door Alarm..........................................3-8
Figure 3-5 Wiring the REX Switch .....................3-10
Figure 3-6 Electric Strike (Fail Secure)
Wiring Diagram ..................................3-11
Figure 3-7 MagLock (Fail Safe) Wiring
Diagram................................................3-12
Figure 3-8 Connecting the prox.pad plus to a
PC COM Port......................................3-13
Figure 3-9 Connecting the prox.pad plus to a
Network ...............................................3-14
Figure 3-10 Networking Multiple prox.pad
plus Units Together ...........................3-15
prox.pad plus Install/Program. Manual, PPP, D4b vii
Part No. 6105679, Rev. 1.1