Detex DTX-4300 - Manual (Page 66)

4.2.4
Enabling/Disabling
Users Command The 56 # set/clear#user Location#command allows
the Master Code or Supervisor Code to disable a par-
ticular user location without deleting that user.
To disable a user, enter:
56 # 1 # user location # **
To enable a user, enter:
56 # 0 # user location # **
• The Master Code can NEVER be disabled.
• The Master Code can disable the Supervisor user
(user # 2).
• The Supervisor can disable users 3-2000.
The Master Code user cannot be disabled, and the
supervisor user cannot disable his/her self. A disabled
Supervisor cannot access Program mode; a non-pro-
grammed user cannot be enabled or disabled (gener-
ates a program error).
Chapter 4: Programming 4.2 Programming Users
4-14 prox.pad plus Install/Program. Manual, PPP, D4b
Part No. 6105679, Rev. 1.1