SINGER S800 FASHIONISTA - Manual (Page 90)

88
NON-STICK FOOT
*Optional Purchase
This foot is used when sewing fabrics such as leather or vinyl.
1. Snap on the Non-Stick Foot. Select desired stitch. Verify
that the needle will line up with the opening of the foot
before starting to sew.
2. Sew slowly and guide the layers.
3. Tip: Try using paper clips to hold fabric layers together.
Using pins will leave holes in leather and vinyl.
OPEN TOE FOOT
*Optional Purchase
This foot provides a more visible view of the area that you will
be stitching. Because of its open area at the front, you can
see markings much more easily.
1. Set machine to desired stitch. Attach the Open Toe Foot.
2. With a marking pencil or chalk, trace the outline for your
design or pattern on the right side of the garment. Hint:
Use a fabric marker that can be removed easily in case the
stitching does not cover it completely.
3. Sew, following the outline you have traced onto your fabric.
Any stitch (except buttonholes) may be used with this foot.