SINGER 2866 - Manual (Page 13)

82 11
Getting to know your machine
Getting to knew your sewing machine
16. Stitch length dial
17. Pattern selector dial
18. Presser foot lifter
19. Thread cutter
20. Feed system
21. Slide plate
22. Foot control
23. Electrical lead
24. Machine plug
25. Power and light switch
26. Mounting nut
(To fix the machine in a cabinet or table,
remove the mounting nut)
27. Stitch width lever
28. Needle position selector
29. Stitch balance selector
30. Automatic needle threader (optional)
Parts
1. Hand wheel
2. Bobbin winder pin
3. Horizontal spool pin
4. Thread guide
5. Bobbin winder tension disc
6. Thread guide
7. Take-up lever
8. Face plate
9. Needle thread tension dial
10. Snap on presser foot
11. Needle plate
12. Removable extension table (Free Arm)
13. Needle clamp
14. Thread guides
15. Reverse push button
Maintenance
Lubricating the
machine
Your sewing machine shall be lubricated according to this
use of where it is stored. If you use it a few times a month,
lubricating the machine once a year is enough. If you use it
frequently, lubricate it at least once a month.
When lubricating, apply only SINGER oil at the points
shown. SINGER oil is specially prepared and does not
contain harmful deposits that can interfere with the
operation of precision parts.
To determine which connections move and need
lubrication, turn the handwheel slowly by hand, while
face place is removed.
BEFORE LUBRICATING THE MACHINE, UNPLUG IT
FROM SOCKET OUTLET.