CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 100)

System Alarms & Logs 9145E NID Software User’s Manual
System Log
#/(4 Blank)
6.1.1 Log Display Filter Configuration
The 9145E has a flexible System Log Display Filter to turn off display of log items that are not of
interest to the user. For example, you can look at events that occurred around a certain date, or
configuration undertaken by a particular user, or just view trap events, and so forth.
The Log Display Filter Configuration screen (Figure 6-3) allows you to reconfigure the log display
filter settings.
1. From the System Log screen (Figure 6-2), type S and press Enter. The Log Display Filter
Configuration screen (Figure 6-3) opens.
2. To modify filter configuration, type the number of the filter and press Enter. Press the
Space bar to select On or Off and Show or Hide.
To change all filters 4 through 15 to Show, type 16 and press Enter.
To change all filters 4 through 15 to Hide, type 17 and press Enter.
3. Type the Date/Time Filter Starts and Date/Time Filter Ends time(s), if desired.
4. To return to the System Log screen, press Esc.
NOTE:
If the Master filter is set to OFF, no filter changes will be applied.
Figure 6-3 Log Display Filter Configuration screen
Canoga Perkins Corp. Ethernet Network Interface Device 16-JUN-2009
9145E-101-1-0 V03.10(GA0014) 11:16:44
-------------------------LOG DISPLAY FILTER CONFIGURATION-----------------------
1. Master Filter: On
Date/Time Filters: 2. Date/Time Filter Starts At: 0
3. Date/Time Filter Ends At: 0
User Name Filters: 4. "SYSTEM": Hide
5. "admin": Show
6. Others: Show
User Type Filters: 7. Local: Show
8. Others: Show
Event Type Filters: 9. System: Hide
10. Security: Show
11. Trap: Show
12. Configuration Change: Hide
13. Action: Show
14. Configuration File Change: Show
15. OAM Event: Show
16. Show All Event Types
17. Hide All Event Types
Select[1-17]:
------------------------------------Messages-----------------------------------