CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 147)

9145E NID Software User’s Manual Service OAM
SOAM Configuration
132
Figure 11-8 SOAM System Level Configuration screen
8. If you chose Locally Assigned in step 4, type 3 and press Enter.
9. To enable Sender ID TLV to be sent for connectivity check (CC) messages, type 4 and press
Enter . Select Enabled or Disabled and press Enter.
10. To enable Sender ID TLV to be sent for loopback messages (LBM), type 5 and press Enter. Select
Enabled or Disabled and press Enter.
11. To enable Sender ID TLV to be sent for a linktrace reply (LTR), type 6 and press Enter. Select
Enabled or Disabled and press Enter.
12. To change the Port ID TLV Type for the User port, type 7 and press Enter. Select None, MAC
Address, or Locally Assigned, and press Enter.
13. To change the Port ID TLV Type for the Network port, type 8 and press Enter. Select None, MAC
Address, or Locally Assigned, and press Enter.
14. If you selected Locally Assigned in step 9, you can change the Port ID TLV Value for the User port.
Type 9 and press Enter. Type a string and press Enter.
15. If you selected Locally Assigned in step 10, you can change the Port ID TLV Value for the Network
port. Type 10 and press Enter. Type a string and press Enter.
16. Type A to accept the new settings and press Enter. Press Esc to return to the SOAM
Configuration screen.
11.2.1 SOAM Configuration Error List
The Configuration Error List is a list of bridge ports, aggregated ports, and VIDs that are
incorrectly configured. The list is updated internally for every configuration change. The following
Configuration Errors can be detected on a 9145E NID:
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:15:27
-----------------------SOAM SYSTEM LEVEL CONFIGURATION--------------------------
1) Service OAM: Enabled
SENDER ID TLV
2) Chassis ID Format: 4 - MAC address
3) Chassis ID Value: 00:40:2A:02:68:60
Management Address Domain: SNMPoverIPv4
Management Address: 172.16.142.195
Sender ID TLV applicability:
4) CC: Enabled 5) LBM: Disabled 6) LTM: Enabled
PORT ID TLV USER PORT NETWORK PORT
Type: 7) 3 - MAC address 8) 7 - Locally assigned
Value: 9) 00:40:2A:02:68:63 10)
11) Configuration Error List
Select [1-11]:
------------------------------------Messages-----------------------------------