CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 118)

Link OAM 9145E NID Software User’s Manual
OAM Peer Information
103
9.2 OAM Peer Information
This table contains information about the OAM peer for a particular Ethernet-like interface. OAM
entities communicate with a single OAM peer entity on Ethernet links on which OA is enabled
and operating properly. There is one entry in this table for each port for which information on the
peer OAM entity is available.
The OAM Peer Information screen provides information about OAM Peer Status, OAM Peer
MAC Address, OAM Peer Vendor, OAM Peer Vendor Info (Hex), OAM Peer Mode, OAM Peer
Max PDU Size, OAM Peer Config Revision, and AM Peer Functions Supported.
From the OAM Control screen, select OAM Peer Information (2) and press Enter. The OAM Peer
Information screen (Figure 9-3) opens. Press Esc to return to the Link OAM menu.
Figure 9-3 The OAM Peer Information screen
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-1-0 V03.10(GA0014) 00:57:44
-----------------------------------OAM PEER INFORMATION------------------------
User Port Peer Network Port Peer
OAM Peer Status Inactive Inactive
OAM Peer MAC Address Unavailable Unavailable
OAM Peer Vendor OUI Unavailable Unavailable
OAM Peer Vendor Info (Hex) Unavailable Unavailable
OAM Peer Mode Unknown Unknown
OAM Peer Max PDU Size Unavailable Unavailable
OAM Peer Config Revision Unavailable Unavailable
OAM Peer Functions Supported Unavailable Unavailabl
Press ESC to return to previous screen
------------------------------------Messages-----------------------------------