6 linktrace procedures, Linktrace procedures – CANOGA PERKINS 9145E NID Software Version 3.1 User Manual
Page 168
Service OAM
9145E NID Software User’s Manual
Maintenance End Points
153
Press Esc to return to the Maintenance End Point List screen.
Figure 11-25 CCM Connectivity Monitoring Details screen
11.6.6 Linktrace Procedures
A Linktrace Message (LTM) is initiated by a MEP to trace a path to a target MAC address or MEP
ID. It is forwarded from MIP to MIP, up to the point at which the LTM reaches its target, a MEP, or
can no longer be forwarded. Each MEP or MIP along the path to the target generates a linktrace
reply (LTR).
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:15:27
-------------------------CCM CONNECTIVITY MONITORING DETAILS-------------------
MEP ID: 1 Direction: Down Level: 0
MA ID: 2 Port: Network
Remote MEP ID: 3
State: Failed
TimeStamp 02-JAN-2009 05:15:27
MAC: FF:FF:FF:FF:FF:FF:
RDI bit: False
Port Status: N/A
Interface Status N/A
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(D)etails, ESC to return:
------------------------------------Messages-----------------------------------