CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 76)

Port Information 9145E NID Software User’s Manual
Port Configuration
61
5.2.2 Functional Configuration
From the Port Configuration screen, select the Functional Configuration (2) and press Enter. The
Functional Configuration screen opens. The Functional Configuration screen (Figure 5-5)
displays the User and Network port speed and duplex information, and allows you to set the
functions listed below.
Figure 5-5 Functional Configuration screen
You can modify the following functions:
User Port Connector
Controls whether the User Port UTP or SFP connector is active,
regardless of what is physically connected. The SPD LED will blink once a second over the
active connector if it is empty. Press the Space Bar to select the SFP or UTP connector.
User Port Setting Sets the speed/duplex for the User Port and allows the port to be disabled. If
UTP is selected as the connector, press the Space bar to select 10M Half, 10M Full, 10M Auto,
100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/1000 Auto, or Disabled. If SFP is
selected as the connector the speed setting is defined by the SFP.
Net Port Connector Controls whether the Network Port UTP or SFP connector is active,
regardless of what is physically connected. The Spd LED will blink once a second over the active
connector if it is empty. Press the Space bar to select the SFP or UTP connector.
Net Port Setting Sets the speed/duplex for the Network Port and allows the port to be disabled.
If UTP is selected as the connector, press the Space Bar to select 10M Half, 10M Full, 10M Auto,
100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/1000 Auto, or Disabled. If SFP is
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V03.10(GA0014) 10:14:38
----------------------------------FUNCTIONAL CONFIGURATION---------------------
User Port Speed/Duplex 100M/Full
Net Port Speed/Duplex 1000M/Full
MP Port Speed/Duplex Admin down
MGMT UTP Port Speed/Duplex Admin down
1) User Port Connector UTP
2) User Port Setting 10/100/1000M Auto
3) Net Port Connector SFP
4) Net Port Setting 1000M Full
5) RMTF Disabled
6) GigE RMTF Mode Both Ports CP Proprietary
7) LLF Disabled
8) Flow Control Disabled
9) Maximum Frame Size 10000
Select [1-9]:
------------------------------------Messages-----------------------------------