CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 182)

Service OAM 9145E NID Software User’s Manual
Configure and View SOAM Statistics
167
Figure 11-41 Maintenance End Point Statistics screen
11.8.2 MIP Statistics
1. To display statistics for all MIPs, on the SOAM Statistics screen (Figure 11-37), type 2 and press
Enter . The Maintenance Intermediate Point Stat Table (Figure 11-41) opens.
2. To see details, type D and press Enter. The current MIP is highlighted.
3. Press the Space bar to select a MIP and press Enter. The Maintenance Intermediate Point
Statistics screen for that MIP (Figure 11-43) opens.
4. Type R to reset all the counters to zero.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:15:27
-------------------------MAINTENANCE END POINT STATISTICS-----------------------
MEP ID: 1 MA/MEG ID: 2.
CCMs sent 0
CCM with RDI sent 0
CCMs Received 0
CCMs invalid received 0
CCMs discarded due to Sender ID TLV invalid 0
CCMs discarded due to Port Status TLV invalid 0
CCMs discarded due to Interface Status TLV invalid 0
CCMs with sequence errors received 0
CCMs with RDI bit set received 0
LBMs received 0
LBRs sent 0
LBMs with bad Sender ID TLV received 0
Use (N)ext page, (R)eset:
------------------------------------Messages----------------------------------