CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 68)

Diagnostics 9145E NID Software User’s Manual
Throughput Test
53
Figure 4-12 Throughput Test screen
The throughput test can only generate traffic out the network port. The test IP is the only IP
address that can be used for the test. The user has to enable this feature from the license
manager screen (see Chapter 7, Utilities).
4.7.1 Test Setup
On the Diagnostics menu (see Figure 4-1), type 7 and press Enter. The Throughput Test screen
(Figure 4-12) opens.
1. Target IP Address Type the target 9145E Test IP address.
2. Outer Tag Type Type the outer tag type. Press the Space bar to select:
• C-TAG: Customer tag, Ethertype 0x8100
• S-TAG: Service tag, Ethertype 0x88A8. Set between 0 and 4094. A VLAN ID of 0
means the test data packets will not be double tagged.
3. Outer Tag VLAN ID
4. Outer Tag CFI Specify the Canonical Format Indicator (CFI) value (0 or 1).
5. Outer Tag Priority Set the frame priority level from 0 (lowest) to 7 (highest) to prioritize different
classes of traffic.
6. Inner Tag VLAN ID Specify Inner Tag VLAN ID between 0 ~ 4094. A VLAN ID of 0 means the test
data packets will not be double tagged.
7. Inner Tag CFI Specify the Canonical Format Indicator (CFI) value (0 or 1).
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V03.10(GA0014) 11:20:59
-------------------------------THROUGHPUT TEST---------------------------------
1) Target IP Address 172.16.168.6 14) UDP/TCP SRC Port 63587
2) Outer Tag Type CTAG 15) UDP/TCP DST Port 45782
3) Outer Tag VLAN ID 259 16) TCP Sequence # 125987530
4) Outer Tag CFI 0 17) TCP ACK # 25
5) Outer Tag Priority 6 18) TCP Flags 142
6) Inner Tag VLAN ID 2345 19) TCP Window Size 5894
7) Inner Tag CFI 0 20) TCP Urgent Pointer 58741
8) Inner Tag Priority 6 21) Edit Packet Data E.......
9) IP Header DSCP 14 22) Pkt Generation Rate 42%
10) IP Header ECN 3 23) Pkt Generation Duration 25P
11) IP Header DF Bit 0 24) Start Throughput Test
12) IP Header TTL 225 25) Show Last Test Result
13) IP Header Protocol TCP
Select[1-25]: 25
------------------------------------Messages-----------------------------------