CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 125)

9145E NID Software User’s Manual CoS Configuration
CoS Support
110
Figure 10-1 Class of Service Configuration screen
10.1 CoS Support
NOTE:
The instructions in the following paragraphs pertain to both the Ingress
and Egress Class of Service (CoS) Support. Functions 1 through 5 are
used for modifying the Ingress CoS Support settings and functions 6
through 10 are used for modifying the Egress CoS Support settings.
From the CoS Configuration screen, type 1 or 6 and press Enter. The Ingress or Egress CoS
Support Enabled/Disabled setting is highlighted. Press the Space bar to select Enabled or
Disabled. Press Enter to accept the setting.
10.2 Classifier Mapping
The Classifier Mapping screen enables the user to choose the classification mapping and mode
for tagged and untagged packets. While tagged packets are mapped using only Priority Code
Point (PCP), there are three classifications available for untagged packets: IP Precedence,
DSCP, and AF/EF modes.
From the CoS Configuration screen, type 2 or 7 and press Enter. The Ingress or Egress
Classifier Mapping screen (Figure 10-2) opens.
Canoga Perkins Corp. Ethernet Network Interface Device 01-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:44:14
------------------------CLASS OF SERVICE CONFIGURATION--------------------------
1) Ingress CoS Support Enabled
2) Ingress Classifier Mapping
3) Ingress Queue Configuration
4) Ingress ED Drop Profile
5) Ingress Queue Statistics
6) Egress CoS Support Disabled
7) Egress Classifier Mapping
8) Egress Queue Configuration
9) Egress ED Drop Profiles
10) Egress Queue Statistics
Select [1-10]:
------------------------------------Messages-----------------------------------