CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 184)

Service OAM 9145E NID Software User’s Manual
Configure and View SOAM Statistics
169
11.8.3 Statistics Display Confirmation
The 9145E NID allows you to monitor a summary of MIP or MEP statistics in tabular form. To
configure which statistics are included in the tabular display, use the following steps.
11.8.3.1 MEP Statistics
1. For MEP statistics, on the SOAM Statistics screen (Figure 11-37), type 3 and press Enter. The
MEP Summary Statistics Configuration screen (Figure 11-43) opens.
Figure 11-44 MEP Summary Statistics Configuration screen
2. You can select up to five items to view. Type the number of the counter and press the Space bar to
select Yes or No. The summary statistics configuration applies to all UI sessions in the system.
3. Type A to accept the settings and press Enter.
4. Press Esc to return to the SOAM Statistics screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 05:15:27
---------------------MEP SUMMARY STATISTICS CONFIGURATION-----------------------
Select up to 5 counters, current selected: 5
1) CCMs sent: Yes 2) CCM with RDI sent: Yes
3) CCMs Received: Yes 4) CCMs invalid received: Yes
5) LBMs received: No 6) LBRs sent: No
7) LBMs sent: No 8) LBRs in order received: No
9) LBRs out of order received: No 10) LBRs with bad MSDU received: No
11) LTMs sent: No 12) LTRs received: No
13) LTMs received: No 14) LTRs sent: No
15) AISs sent: Yes 16) AISs received: No
Select [1-16] for counters:
------------------------------------Messages-----------------------------------