CANOGA PERKINS 9145E NID Software Version 3.1 - Manual (Page 127)

9145E NID Software User’s Manual CoS Configuration
Classifier Mapping
112
Figure 10-3 Ingress Tagged Packet Classifier screen
10.2.3 Untagged Packet Classifier Mapping
To configure the queue mapping for untagged packets, type 2 and press Enter. One of the
Untagged Packet Classifier Mapping screens (Figure 10-4 through Figure 10-6) opens,
depending which mode you selected in section 10.2.2.
10.2.3.1 IP Precedence Mode
Type the number of the IP Precedence, or a series of numbers in the form 3-7, and press Enter.
The CoSQ setting in the column beside the IP Precedence number, or the first number/value of
the series (for example: 3 if 3 - 7) is highlighted. Press the Space bar to scroll through the
available queues. Select a queue and press Enter. If a series of numbers was chosen, all of
those CoSQs will be changed. Once all CoSQs are set, press Esc to return to the Classifier
Mapping screen.
10.2.3.2 DSCP Mode
Type the number of the DSCP, or a series of numbers such as 8-53 if desired, and press Enter.
The cursor moves to the CoSQ setting in the column beside that DSCP number, or the first
number/value of the series (for example, 3 if 3 - 7) is highlighted. Press the Space bar to scroll
through the available queues. Select a queue and press Enter. If a series of numbers was
chosen, all the CoSQs will be changed. Once all CoSQs are set, press Esc to return to the
Classifier Mapping screen.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V03.10(GA0014) 00:24:10
--------------------INGRESS TAGGED PACKET CLASSIFIER MAPPING--------------------
PCP CoSQ
--- ----
0 Q1
1 Q1
2 Q1
3 Q1
4 Q2
5 Q2
6 Q3
7 Q3
Select PCP or a Range x-y [0-7]:
------------------------------------Messages-----------------------------------