STIEBEL ELTRON SOM 10 - Manual (Page 12)

en
12
5 Initial commissioning
When the hydronic system is filled and ready for ope-
ration, connect the controller to the power supply.
The controller runs an initialization phase in which
the directional pad flashes red.
When the controller is commissioned for the first
time or when it is reset, it will run a commissioning
menu after the initialization phase. The commissioning
menu leads the user through the most important ad-
justment channels needed for operating the system.
Commissioning menu
The commissioning menu consists of the channels
described in the following. In order to make an ad-
justment, push button
5 . Adjust the value by pres-
sing buttons 4 and 2 , then bush button 5 to
confirm. The next channel will appear on the display.
5
5
adjustment mode
button navigation
changing a value
confirming a value
next parameter appears auto-
matically
2 4
1. Language:
Î Adjust the desired menu language.
2. Units:
Î Adjust the desired temperature unit.
Î Adjust the desired volume unit.
Î Adjust the desired pressure unit.
Î Adjust the desired energy unit.