STIEBEL ELTRON SOM 10 - Manual (Page 48)

en
48
When a function is selected, a submenu opens in
which all adjustments required can be made.
With this submenu, a relay and, if necessary, certain
system components can be allocated to the function.
The menu item Relay selec. is available in all optio-
nal functions. Therefore, it will not be explained in the
individual function descriptions.
With this menu item, a relay can be allocated to the
function. All free relays are available for selection.
In the submenu Controller, all free relays of the
controller are displayed. If external modules are con-
nected and registered, their relays will be displayed in
corresponding submenus.
When a function has been selected and adjusted, it
will appear in the Opt. functions above the menu
item Add new function....
This allows an easy overview of functions already acti-
vated.
An overview about which sensor has been allocated to
which component and which relay has been allocated to
which function is given in the Status / Service menu.
At the end of each optional function submenu, the
menu items Funct. and Delete function are availa-
ble.
With the menu item Funct., an optional function al-
ready selected can be temporarily deactivated or re-
activated respectively. All adjustments remain stored,
the allocated relays remain occupied and cannot be
allocated to another function.
If the menu item Delete function is confirmed by
pressing button
5 , a security enquiry appears. The
setting can be changed between Yes and No by pres-
sing buttons
and 4 . If Yes has been selected
and confirmed by pressing button 5 , the function
is deleted and available under Add new function...
again. The corresponding relays are available again.
Parallel relay
Note:
If a relay is in the manual mode, the selected
parallel relay will not be energized.