STIEBEL ELTRON SOM 10 - Manual (Page 69)

en
69
12 Basic settings
In the Basic settings menu, all basic parameters for
the controller can be adjusted. Normally, these set-
tings have been made during commissioning. They can
be subsequently changed in this menu.
Adjustment channel Description Adjustment range / selection Factory setting
Language Selection of the menu language Deutsch, English, Francais Deutsch
Auto DST Daylight savings time selection Yes, No Yes
Date Adjustment of the current date 01.01.2001 ... 31.12.2099 01.01.2010
Time Adjustment of the current time 00:00 ... 23:59 -
Temp. Unit Temperature unit °C, °F °C
Vol. unit Unit of volume Gallons, Litre Litre
Press. unit Unit of pressure psi, bar bar
Energy unit Energy unit Wh, BTU Wh
Factory setting back to factory settings Yes, No No
Basic settings The controller is equipped with an SD card slot for
SD memory cards.
The following functions can be carried out with an
SD card:
• Logging measurement and balance values. The valu-
es can be opened and visualized on a computer, e.
g. in a spreadsheet programme.
• Transferring adjustments and parameterizations
prepared on the computer onto the controller.
• Storing adjustments and parameterizations onto
the SD card and restoring them if necessary.
• Run firmware updates onto the controller.
Firmware updates
When an SD card with a firmware update is inserted,
the enquiry Update? is indicated on the display. The
setting can be changed between Yes and No by pres-
sing buttons
and 4 .
Î To run the update, select Yes and confirm by
pressing button
5 .
The update is run automatically. The indication Ple-
ase wait and a progress bar appear on the display.
When the update has been completed, the controller
will automatically reboot and run a short initialization
phase.
Î To skip the update, select No.
The controller commences normal operation.
13 SD card