KEYENCE DL-EP1 - Manual (Page 69)

3-4 Message Communication
3-39
3
C
om
m
uni
ca
tin
g
w
ith
IB
S
er
ie
s
- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (IB) -
Group1
0326H
(806)
Internal
measurement
value (R.V.) *2
Read the R.V. value.
When measurement mode is % mode: -999.99 to
+999.99
When measurement mode is dimension mode:
-99.999 to +99.999
R DINT
0327H
(807)
Peak-hold
value in hold
mode *2
•
When the hold function is other than sample
hold
Reads the peak hold value during sampling.
When measurement mode is % mode: -999.99
to +999.99
When measurement mode is dimension mode:
-99.999 to +99.999
•
When the hold function is sample hold
When measurement mode is % mode: -999.98
When measurement mode is dimension mode:
-99.998
R DINT
0328H
(808)
Bottom-hold
value in hold
mode *2
•
When the hold function is other than sample
hold
Reads the bottom-hold value during sampling.
When measurement mode is % mode: -999.99
to +999.99
When measurement mode is dimension mode:
-99.999 to +99.999
•
When the hold function is sample hold
When measurement mode is % mode: -999.98
When measurement mode is dimension mode:
-99.998
R DINT
0329H
(809)
(Reserved for system)
032AH
(810)
Analog
output value
Reads the current analog output value. (Main unit
only)
Parameter range:
Voltage: -5.000 to +5.000 (when an error occurs:
+5.500)
4 to 20 mA:+4.00 to +20.00 (when an error occurs:
+3.00)
OFF: Fixed at 0
R DINT
032BH
(811)
Bank status
Reads the number of the currently operating
bank.
Check the number of bank where the sensor
amplifier is actually operating from this attribute.
Parameter range: 0 to 3
0: Bank 0
1: Bank 1
2: Bank 2
3: Bank 3
R DINT
032CH
(812)
Timing status
Reads the timing status of the operating sensor
amplifier.
Check the timing status of the actually operating
amplifier from this attribute.
Parameter range: 0 to 1
0: Sampling now in progress
1: Sampling not in progress
R DINT
032DH
(813) to
0331H
(817)
(Reserved for system)
Class
Attribute
ID
Name Description Attribute
Data
Type