Connection using rs-232c, Connection using rs-232c -3 – KEYENCE LK-H1W User Manual
Page 15
2-3
LK-H1W-M-NO2-E
2 Preparations
2
Connection using RS-232C
The method to connect the controller to a PC using the RS-232C cable is described as
follows.
To connect the controller to a PC using the RS-232C cable, a dedicated cable OP-96368
(straight cable 2.5 m) and a OP-96369 (D-sub 25-pin connector) or OP-26401 (D-sub 9-
pin connector) are required as shown below.
1
Connect the dedicated cable OP-96368 to the RS-232C connector of the con-
troller.
2
Connect OP-96368 to OP-96369, and connect the cable to the RS-232C connec-
tor of a PC.
Connection using OP-96369 (D-sub 25-pin connector) is shown as an example.
The location and direction of the RS-232C port may differ depending on PC. When
connecting the RS-232C cable, refer to the Operating Instructions supplied with the PC.
PC
OP-96369 or
OP-26401
OP-96368