KEYENCE LK-H1W - Manual (Page 58)

3-30 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
3. Display OUT1/Display OUT2
The following three types of display are available.
• OUT1 independent display
: Turn ON the [Display OUT1] check box.
• OUT2 independent display : Turn ON the [Display OUT2] check box.
• OUT1 and OUT2 simultaneous display : Turn ON both of the [Display OUT1] and
[Display OUT2] check boxes.
Both of the [Display OUT1] and [Display OUT2] check boxes cannot be turned OFF at the
same time.
4. Displaying the measured values after auto zero, reset, and timing processing are
applied.
Zero
The measured values are displayed after the present measured value is set to the refer-
ence value (zero).
Reset
The measured values displayed after the processing in a Measurement Mode are cleared.
Timing
Timing ON and OFF are toggled.
Simultaneous Timing
When OUT1 and OUT2 are displayed at the same time, the timing inputs to OUT1 and
OUT2 should also be input at the same time.
5. Statistical Value Indication
When you click the [Statistical Value Indication] button, [Statistical Values List] is
displayed.
For the auto zero function, refer to "LK-G Series User’s Manual" refer to "Chapter 2
Operations and Functions during Measurement" (2-1 page).
For the Measurement Value Reset function, refer to "LK-G Series User’s Manual" refer to
"Chapter 3 Function Settings" (3-1 page).
For the timing function, "LK-G Series User’s Manual" refer to "LK-G Series User’s Manual"
refer to "Chapter 3 Function Settings" (3-1 page).
Reference
6
7
8