KEYENCE LK-H1W - Manual (Page 39)

3-11 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
3. Measurement, Tolerance
The method to set the Measurement and to set the Tolerance Comparator is described below.
Measurement mode
Set the measurement mode.
TRIGGER
When any item other than [NORMAL] is selected by the [Measurement mode], trigger is
requested to be set.
Filter
• Type
Use this function to set the filter processing that is best suited for the measured value.
• Averaging Times
Set the number of the Averaging Times when [Moving-average] is selected by [Type].