KEYENCE LK-H1W - Manual (Page 46)

3-18 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
4. Strobe time
When any measurement mode other than NORMAL is selected, the strobe time can be
set.
5. Tolereance comparator output format
This function is used to set the operation of the Tolerance Comparator Output when result
of the Tolerance Comparator judgment changes from ON to OFF.
6. Data Storage
Selected OUT
Set the OUT that becomes the target of data storage.
Amount of Data Stored
Set the number of data to be stored.
Storage cycle
Set the interval at which the data is stored.
Data is stored at the interval (in units of milli second or micro second) of the storage cycle
that is displayed under the set value.
7. Copy common settings, Past common settings
This function is used to copy the already established setting of a program to the Common
Settings of the other program No.
Refer to "Procedure of Copying the Settings of the Common Settings to Other Programs"
(page 3-19).
Reference