KEYENCE LK-H1W - Manual (Page 25)

2-13 LK-H1W-M-NO2-E
2 Preparations
2
3
Click the [OK] button.
The program is initialized.
■
Procedure for reading from a file
Execute step 1 of [Start] to start up "LK-Navigator".
1
Select [Read from file.]
2
Click the [OK] button.
The [Open] window appears.
3
Select the setting file you want to read.
Select "LK-G_Config.ldt" here.
4
Click the [Open] button.
The setting contents are read out.
If you click the [Cancel] button here, the same operation as that of [Start up with the default
values] is executed. ( page 2-12).
■
Procedure to read the setting contents of the connected controller
Execute step 1 of [Start] to start up "LK-Navigator".
1
2
3
4
Reference