KEYENCE LK-H1W - Manual (Page 37)

3-9 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
3
Click the [Stop] button. The calibration ends and the optimal values are set
automatically.
If the [Cancel] button is clicked, the calibration is cancelled so that the settings are not
changed.
■
Procedure to Copy the Setting of a Head to Another Head
The procedure of copying the [Head-A] setting to [Head-B] is described below as an example.
First, complete all settings of [Head-A].
1
Click the [Copy the Head-A setting] button.
The [Paste the copied head setting] button becomes active.
2
Click the [Head-B] tab.
You can paste the setting to the head setting of other Program No. To paste the setting to
the head setting of other Program No., select first the desired Progam No., then select the
head.
3
Click the [Paste the copied head setting] button.
Note
1
2
Reference
3