KEYENCE LK-H1W - Manual (Page 22)

2-10 LK-H1W-M-NO2-E
2 Preparations
2
Installing the USB Driver
The driver is installed at the same time as the application software for Windows 7, Vista,
XP, and 2000. Normally following operations are not necessary. If the driver installation
is cancelled while installing the application software, follow the procedure to install the
USB driver that is described below. When the USB driver is installed in a PC, it recog-
nizes the controller automatically.
• Installation of the USB driver in Windows XP is described as an example.
• Before starting installation, quit all applications that are already running.
• To install the USB driver, log on to the PC as the user that has the administrator authority.
• The USB connector of the controller is Type-B. Use a USB cable that has a Type-B
type connector at one end.
• The controller conforms to the USB 2.0 Full Speed. Since the USB interface maintains
the backward compatibility, the controller can communicate with a PC in which USB
version 1.1 is installed.
1
Start up the controller and the PC.
2
Connect the controller to the PC using the USB cable.
The [New hardware search wizard] window appears.
3
Insert the CD-ROM "LK-H1W" in the CD-ROM drive and double-click the [Next]
button.
The [Installing the software. Please wait a while] window appears. Installation starts.
• If the following window appears during installation, click the [Continue] button.
• Depending on your Windows version, [Found New Hardware Wizard] may appear,
prompting you to connect Windows Update. In this case, select [No, not this time] and
click the [Next] button.
When installation ends successfully, the [New hardware search wizard ends] window
appears.
4
Click the [End] button.
This completes the USB driver installation.
Note
Reference