KEYENCE LK-H1W - Manual (Page 69)

3-41 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
■
Read Storage Data
Click the [Storage Data Readout] button.
The [Read Storage Data] window appears.
1. Target OUT
Set the OUT that becomes the target of data readout.
2. OUT1
When either [OUT1] or [OUT1/OUT2] is selected by [Target OUT], the data to read out
from OUT1 is selected as described below.
A waveform is displayed on the [Data Storage] window by specifying the data number
that corresponds to the already set data number.
3. OUT2
When either [OUT2] or [OUT1/OUT2] is selected by [Target OUT], the data to read out
from OUT2 is selected as described below.
A waveform is displayed on the [Data Storage] window by specifying the data number
that corresponds to the already set data number.
4. Readout
Readout of the storage data starts.
While [Readout] is being executed, the controller enters "Communication mode".
1
2
3
4
Note