KEYENCE LK-H1W - Manual (Page 60)

3-32 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
View Received Light Waveform
The [View Received Light Waveform] function allows you to view the measured light
intensity on a PC as described below.
Click the [View Received Light Waveform] button of the tool bar. The [Head-A Received
Light Waveform Display] button is clicked in this example.
The same operation as above is executed by selecting [Head-A Received Light Waveform
Display] from [View] of tool bar.
The [Head-A Received Light Waveform Display] window appears.
Size of the [Head-A Received Light Waveform Display] window can be changed.
Size of the [Head-A Received Light Waveform Display] window cannot be reduced
smaller than the original size of the window.
1. Start acquiring the received light data
Starts acquiring the received light data from the controller and starts displaying the new-
est waveform.
When you click the [Start acquiring the received light data] button, it changes to [Interrupt
acquiring the received light data].
Reference
2
4
3
8
7
1
5
6
Reference