KEYENCE LK-H1W - Manual (Page 42)

3-14 LK-H1W-M-NO3-E
3 Operations and Functions of Software
3
When the setting [Minimum display unit] is changed, settings of the following items are
initialized.
Scaling/Offset/Tolerance Setting/Analog Output Scaling/Auto Zero Reference Value
Analog output
• Analog through
Set whether the measurement value is output to the Analog output with or wihtout
processing, regardless of the setting of [Measurement Mode].
• Analog output scaling
Set the Scaling on the Analog output with respect to the measurement value.
Scaling can be applied to the Analog output in the range of ±10.5 V.
6. Copy OUT-1 settings. Past OUT settings.
This function is used to copy the already established OUT-1’s setting to the other OUT’s
settings (including the OUT setting of other program No.)
Refer to "The procedure to copy the OUT’s setting to the other OUT’s setting" (page 3-16).
Note
Reference