KEYENCE DL-CL1 - Manual (Page 18)

2-2
2
Connec
ti
on and
Conf
ig
u
ration
- CC-Link Compatible Network Unit DL-CL1 User’s Manual (SK-1000) -
2-1
Installation and Connection to Sensor Amplifiers
This section provides the procedures for installing the DL-CL1 and connecting to
sensor amplifiers.
The DL-CL1 can be connected with the expansion units of sensor amplifiers which
support D-bus. ("D-bus" is the name of KEYENCE's wiring-saving system for sensor
amplifiers.) How many sensor amplifiers can be connected depends on the sensor
amplifiers or units to be connected. For specific numbers of connections, refer to the
manual of each sensor amplifier.
When connecting the DL-CL1 to a sensor amplifier which can be configured with
expansion units, the main unit will be assigned ID number 01, with the expansion
units assigned ID numbers of 02 to 08.
• The ID number assignments to sensor amplifiers cannot be
changed by the user.
• In this manual, ID number 01 to ID number 08 are denoted as ID 01
to ID 08, respectively.
For DIN rail mounting type
ID Number Assignments to Sensor Amplifiers
Point
ID number 01
Main unit Expansion unit Expansion unit Expansion unit
02
...
08
Sensor amplifier DL-CL1