KEYENCE DL-CL1 - Manual (Page 42)

3-2 Device Maps
3-14 - CC-Link Compatible Network Unit DL-CL1 User’s Manual (SK-1000) -
Comm
u
nic
a
ti
ng
w
it
h th
e
SK-1
000 Se
ri
es
3
Remote output RY (master station -> DL-CL1)
Operating
mode
Device no.
(HEX)
Name
Communication
method
Description Writing range
Mo
ni
to
r mo
de
2
F
u
ll mo
de
1
F
u
ll mo
de
2
RY[n] + 00
to 07 External input-1
ID 01 to ID 08
*1
Receives external input-1 by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0: OFF
1: ON
RY[n] + 0F System reserved - Unusable -
RY[n] + 10
to 17 External input-2
ID 01 to ID 08
*1
Receives external input-2 by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0: OFF
1: ON
RY[n] + 1F System reserved - Unusable -
RY[n] + 20
to 27 External input-3
ID 01 to ID 08
*1
Receives external input-3 by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0: OFF
1: ON
RY[n] + 2F System reserved - Unusable -
RY[n] + 30
to 37 External input-1
ID 01 to ID 08
*1
Receives external input-4 by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0: OFF
1: ON
RY[n] + 3F System reserved - Unusable -
RY[n] + 40
to 4E (Not used)
ID 01 to ID 08
- - -
RY[n] + 4F
to 50
System reserved - Unusable
-
RY[n] + 51
Request for
command
*3
Used when communicating under
handshake control program.
This is input when requesting
command execution.
0->1: Request
execution
RY[n] + 52 System reserved - Unusable -
RY[n] + 53
Request to lock
judgment value
update
-
Used when locking data update of
judgment value.
This may be used to obtain the
judgment values of multiple sensor
amplifiers at the same timing.
The judgment value is locked while
the update request is held.
The update lock state can be
checked by the judgment value
update lock state (RX[n] + 53).
0: Do not lock
update
1: Request
update lock
RY[n] + 54
to 5F
System reserved - Unusable -
RY[n] + 60
to 67
Request to
change BANK
ID 01 to ID 08
*3
Used when changing BANK
number.
This is input when requesting to
change the BANK number of each
sensor amplifier.
The request input is received by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0->1: Request
change
RY[n] + 6F
Clear BANK
error
*3
Used when changing BANK
number.
This is input when clearing a
BANK change error.
0->1: Clear error
RY[n] + 70
to 77
HI setting value
(BANK 0)
rewrite request
ID 01 to ID 08
*5
Used when rewriting a setting
value.
This is input when requesting to
rewrite the HI setting value (BANK
0) of each sensor amplifier.
The request input is received by
assigning each sensor amplifier
(ID 01 to ID 08) to each RY.
0->1: Request to
rewrite