Potter PFC-6075R - Manual (Page 51)

4-45
PFC-6075R • 5403594 • REV D • 9/14
The table below provides a brief summary of the pushbuttons:
Table 7: Control Panel Pushbuttons
Pushbutton Description
Press to acknowledge the currently displayed condition .
Press to silence all outputs programmed as silenceable and buzzer.
Press to reset panel to normal condition.
Press to begin a fire drill.
Status LEDs
The control panel’s LEDs communicate system conditions by illuminating and/or flashing the applicable green, red or amber
indicators. These are described in the table below.
Figure 62. Control Panel Status LEDs
Table 8: Status LEDs
LED Type LED Color/Action Description
Power Steady Green
Power is present.
Note: If power is absent for more than 5 seconds, LED will extinguish.
Alarm Flashing Red An alarm device is active.
Pre-Release Steady Amber A releasing zone is in a Pre-discharge mode.
Release Steady Red A release condition is active.
Earth Fault Flashing Amber A ground fault is present.
Supervisory Flashing Amber A supervisory condition is present.
Silenced Steady Amber A fault condition has been silenced.
Trouble Flashing Amber A fault condition is present.