Potter PFC-6075R - Manual (Page 58)

5-52
PFC-6075R • 5403594 • REV D • 9/14
The following series of messages display on the LCD:
Notes:
• If the Ethernet cable is connected to PC, you will see the "Initializing IP" message prior to the "Obtaining IP"
message.
• If your PC is connected directly to the panel, the "Obtaining IP" message displays for approximately 45 seconds,
followed by the "Private IP" message (the "Private IP" message is not shown here).
Note: The number “10.0.5.27” shown above represents an example of a panel’s IP or identifier used for illustration
purposes only. The panel’s IP is unique to each computer / network. Write down the IP address; it is required to transfer
programming data between the panel and the computer.
3. The “IP configured” and “IP address” prompts alternatively display until configuration is completed.
Note: If Ethernet connectivity is lost, the message “Ethernet Lost” displays on panel. This indicates that the Ethernet cable
is disconnected at the panel or network (computer) port.
PFC-6075R
Initializing IP
PFC-6075R
IP Configured
PFC-6075R
Obtaining IP
IP address
10.0.5.27