Potter PFC-6075R - Manual (Page 86)

5-80
PFC-6075R • 5403594 • REV D • 9/14
Releasing Zone Attributes
The fields shown below are available only when configuring a “Releasing” zone. Please refer to the “Releasing Zones
Configuration” heading located later in this section for details on these fields.
Figure 105. Releasing Zone Fields
Creating Zones
When creating zones, you may create one or more at a time. This section explains this process and includes examples for your
convenience.
To create a zone:
1. In the Zones window, right click on any zone name. The shortcut menu displays.
2. Click on “Add Zones”. The Add Multiple Zones dialog box displays.
Figure 106. Examples of Adding Multiple Zones Dialog Box
3. In “Number of Zones” field, enter the number of zones to create.
Note: You may enter up to 99 zones.
4. In “Starting Zone Number” field, enter the zone number to begin numbering zones, if different from default.
5. Click OK or Cancel to exit dialog box. The Zones window lists all new zones.
Figure 107. Zones Window
6. Go to the “Zone Configuration” window, to view all available zones.
Figure 108. Example of Configuring Two (2) Zones