Potter PFC-6075R - Manual (Page 73)

5-67
PFC-6075R • 5403594 • REV D • 9/14
User Codes
The Users option allows you to create up to ten (10) user code profi les, if needed. Each profi le may have different access rights,
which controls the panel functions a user may access as well as the option to connect to the Facility Management Tool.
Note: Please refer to the "Facility Management Tool" manual to learn more about programming, installing and using
this tool.
To create a new user:
1. Click on the Users option. The User’s Code window displays.
Figure 88. Example of Users Profi le Window
2. Double click in the “Name” fi eld to enter a descriptive user name.
3. Click in the appropriate fi eld selection boxes to grant access to each panel keypad option applicable for the user.
4. Click in the last two (2) fi elds, "PC Connect Unsupervised Multi User" and "PC Connect Supervised Single User" to allow
the user code access to the Facility Management Tool.
5. Repeat steps for up to 10 user codes.
Note: The access rights for the “Default Access” user code can be modifi ed if needed.
These fi elds allow the user
access to these panel functions
when selected.
These two fi elds may be
selected to allow the user
access to the "Facility
Management Tool."