Rack mounting, Chapter 2: unit and software installations, Blank bracket – Toa NX-100S Installation User Manual
Page 17: Fiber washer (for m5), 5 x 12 rack mounting screw, 3 x 4 tapping screw, Coupler, M3 x 6 oval head screw, Component parts of mb-15b-bk, Component parts of mb-15b-j
2-6
Chapter 2: UNIT AND SOFTWARE INSTALLATIONS
3. RACK MOUNTING
Use the optional mounting hardware set when installing the unit in an equipment rack. Be sure to remove the
rubber feet located on the unit's bottom surface before mounting.
• Use the optional MB-15B-BK hardware set when mounting a single unit.
00-05-F9-FF-80-81
NETWORK AUDIO ADAPTER NX
-100
S
LNK
/ACT
FD
/C
OL
SIG
NA
L
INPUT
PEAK
STATUS
ERROR
RUN
RESET
NX-100/100S
M3 x 10 machine screw*
2
(supplied with NX-100/100S)
M3 x 10 machine screw*
2
(supplied with NX-100/100S)
Rack mounting bracket*
1
Blank bracket*
1
Fiber washer (for M5)*
1
5 x 12 rack mounting screw*
1
3 x 4 tapping screw*
1
00-05-F9-FF-80-81
NETWORK AUDIO ADAPTER NX
-100S
LNK
/ACT
FD/CO
L
SIGNA
L
INPUT
PEAK
STATUS
ERROR
RUN
RESET
00-05-F9-FF-80-81
NETWORK AUDIO ADAPTER NX
-100
S
LNK
/AC
T
FD
/C
OL
SIG
NA
L
INPUT
PEAK
STATUS
ERROR
RUN
RESET
NX-100/100S
NX-100/100S
M3 x 10 machine screw*
2
(supplied with NX-100/100S)
M3 x 10 machine screw*
2
(supplied with NX-100/100S)
Rack mounting bracket*
1
Fiber washer (for M5)*
1
Coupler*
1
5 x 12 rack mounting screw*
1
M3 x 6 oval head screw*
1
• Use the optional MB-15B-J hardware set when mounting 2 units.
*
1
Component parts of MB-15B-BK
*
2
Note
Never use the screws supplied with the
MB-15B-BK to mount the bracket.
The screws supplied with the MB-15B-BK
are so long as to damage the internal
parts, possibly causing the unit to fail.
*
1
Component parts of MB-15B-J
*
2
Note
Never use the screws supplied with the
MB-15B-J to mount the bracket.
The screws supplied with the MB-15B-J
are so long as to damage the internal
parts, possibly causing the unit to fail.