Toa NX-100S Installation - Manual (Page 98)

5-10
Chapter 5: OPERATION SETTINGS (NX-100 OPERATION PROGRAM)
(1) (2) (3)
[Registration Contents List]
(1) Visible
Displays or hides the Selection buttons.
(2) No.
Selection button numbers. These numbers cannot
be changed.
The buttons are arranged in the order of the
button number (see figure at right) on the
operation screen.
(3) Indication Name
The name of the Selection button to be displayed
on the operation screen.
Selection button layout
(Example when 5 horizontal
by 10 vertical buttons are set.)
8. SETTING THE SELECTION BUTTON CONTENTS
Program the broadcast pattern and the contact output activation setting into the Selection button.
Step 1. Click on the Single selection button tab on the Button Setting screen ( p. 5-8 ).
The Single selection button setting screen is displayed.
(Setting screen example)