Toa NX-100S Installation - Manual (Page 91)

5-3
Chapter 5: OPERATION SETTINGS (NX-100 OPERATION PROGRAM)
3. OPERATION SCREEN DESCRIPTION
This section explains the screen layout, using the accompanying operation setting screen as an example.
(2)
(5)
(1)
(3) (4)
(1) Selection Button
Selects the broadcast pattern and contact output to be activated. The number of buttons programmed is
50 by default. One broadcast pattern or up to 64 units X 8 contact output channels can be set per
Selection button.
(2) Group Button
Used to simultaneously select two or more Selection buttons. The number of buttons programmed is 10 by
default.
(3) Start Button
Starts up the activation contents (broadcast pattern and contact output) selected with the Selection or
Group buttons.
This button can be hidden from display depending on the setting.
(4) End Button
Terminates activated broadcasts or contact outputs.
(5) Message Display Area
Displays responses to operations or the contents of errors.